Low-energy house: energy-efficient construction and sustainable living?

Since 2007, there has been a draft law that attempts to regulate the energy efficiency of construction projects and thus improve the housing landscapes in cities and in the countryside in terms of sustainability. In order to obtain a building license, certain requirements must be met.

In addition, low-energy houses are supported with development loans, as the interest of the government and development banks also continues. Of course, not all new buildings have to be low-energy houses and categories under the definition of low-energy house also receive funding. With sustainable living, however, not only the environment benefits, but also you save energy costs.

You want to buy or build a house, but don’t know which one is right for you? Then take a look at our guide to house types from A – Z! Here you will find all house types, from bungalow to terraced house!

Regulations: Energy standards for old and new buildings

An interesting fact about the low-energy house is that the term is not subject to uniform standards. The reason for this is that the energy regulations for buildings are regularly renewed or supplemented. Since November 2020, the Building Energy Act, or GEG for short, has applied to new buildings. Here, characteristic values are defined that new buildings must at least achieve.

The standards introduced in this law refer to the heating system, the thermal insulation and calculate a value which classifies the house according to its energy balance. In this way, certain measures can compensate for deficiencies.

Special features in construction: solar system, heating & Co.

In the name of sustainability, certain measures must be taken in the construction of the houses, for example to reduce transmission heat loss and thus reduce energy consumption.

These home improvement projects can be multifaceted. Commonly performed renovations are the following:

• Solar system
• Solar thermal
• Ventilation system + thick, non-opening windows
• Modern heating system

Advantages and disadvantages of a low-energy house: costs, construction and measures

Depending on the measures taken, the special construction method entails advantages and disadvantages that should not be underestimated. In the long run, it can happen that certain circumstances are perceived as annoying, so you should think about it in advance whether you would be able to cope with the factors.

At the same time, the house form also has advantages that make life more comfortable. In general, it should be mentioned that energy efficiency is often associated with heating as little as possible, potentially freezing or having to endure cold showers. This is absolutely not the case in modern buildings, where other measures are taken to meet and reduce energy demand.

Advantages: No incidental expenses?

The clear advantage of low-energy houses is, of course, the reduced energy costs. As an occupant, you will notice this above all on your utility bill, because structural measures balance out the energy requirements and ensure a comfortable living environment.

• 35-75 kWh/(m²a) Annual heating requirement
• Low ancillary costs
• Own energy production

Disadvantages: Closed windows?

In addition to limiting the transmission heat loss and the resulting increase in primary energy costs, however, low-energy houses can also entail restrictions that some people find annoying. This means, for example, that windows can no longer be opened and ventilation is provided by a ventilation system. If this is defective, the risk of mould quickly arises.

• Windows that cannot be opened
• Moisture build-up
• Risk of mould

Energy rules for tenants, buyers and builders

New buildings in particular have to meet relatively strict requirements in order to obtain a building permit. However, these regulations are now standard in the building world. However, 63% of residential buildings were built before 1987. These have also had to endure renovations over the years. Many of these measures took place to improve sustainability.

Energy Saving Ordinance and Building Energy Act

The legal text of the Energy Saving Ordinance has so far determined the values that a building must comply with in order to obtain an energy pass. This regulation was replaced in 2020 by the GEG, i.e. the Building Energy Act. The new law also incorporates the Energy Saving Ordinance and the Renewable Energies Heat Act. However, the energy requirements for new buildings and renovations were not tightened.

Contents and innovations of the law:

• Obligation to use renewable energies
• Obligation to use electricity generated close to buildings
• Flexibility options for meeting energy standards in new buildings
• Regulates the primary energy factors
• Carbon dioxide emissions are to be recorded in the energy certificate of a house
• In the case of sale or refurbishment: obligatory energy advice for buyers or owners

Energy efficiency classes: Values, data, prices

Since recently in the GEG fixed, and previously in other laws, are the energy efficiency classes, according to which houses are evaluated. Real estate is rated in 9 levels from A+ to H. New buildings are usually in the upper classes. New buildings are usually in the upper classes, while old buildings, even after renovation, make it to class E-D. Low-energy houses normally achieve around 70 kWh/(m²a) and are able to reduce this to around 30 kWh/(m²a) through self-production.

We have summarized the classes for you together with the guideline value and the associated energy costs per square meter:

• A+: < 30 kWh/(m²a) // < 2 €/(m²a)
• A: < 50 kWh/(m²a) // 2 €/(m²a)
• B: < 75 kWh/(m²a) // 3 €/(m²a)
• C: < 100 kWh/(m²a) // 4 €/(m²a)
• D: < 130 kWh/(m²a) // 6 €/(m²a)
• E: < 160 kWh/(m²a) // 7 €/(m²a)
• F: < 200 kWh/(m²a) // 9 €/(m²a)
• G: < 250 kWh/(m²a) // 11 €/(m²a)
• H: > 250 kWh/(m²a) // > 13 €/(m²a)

Costs: Standard house construction and low-energy house in comparison

So, theoretically, the extremely energy-efficient home is in the A+ energy efficiency class. That was to be expected or anything else would have been sobering, but what does it actually cost to build such a house? The price per square metre for a new house ranges from €1,396 to €2,176. This value is not adjusted for zero energy houses, but includes them. Nevertheless, in the following we calculate with the average of these two figures.

The average value is 1786 €/(m²a), which we multiply by the approximate area of a single-family house, i.e. 150 m².

• Average construction costs € 267,900

Additional costs for the low-energy house

Low-energy houses cost between 5 – 15 % more to build than the average house. We again assume the average value, i.e. 10%, and add €26,790 to our house price.

• Costs low energy house: 294.690 €

Low-energy houses: When does it start paying off?

Low-energy houses have an energy consumption of normally 2 €/(m²a) per year. Standard houses are assumed to have a class C, i.e. 4 €/(m²a).

We would like to know therefore, when we have the 26,760 € with the low-energy house again in it, and/or in relation to a standard house, from when one would have it in additional energy costs again reingeholt. Here it is very conducive to the calculation that both amounts include about 2 €.

150 square metres of living space thus make 300 € in ancillary costs p.a. With this, one would assume that low-energy houses only pay off after 89 years of use compared to a standard new building. However, this ignores certain aspects. On the one hand, you sell your electricity on when the solar system produces more than you need, so if you produce more than you need, you earn money.

Moreover, low-energy houses are not only about saving costs, but above all about reducing the carbon footprint by consciously using natural resources. It should also be noted that all values used are approximate and should not be considered absolute. In addition, we did not use adjusted figures for the calculation at the beginning, so overall we can assume that the duration is significantly lower. Often 20 – 30 years are mentioned.

Finally, it must not be forgotten that low-energy houses are much more compact than standard houses, the calculation with 150 sqm is accordingly quite excessive. The efficient living space of low-energy houses contributes to the fact that the values calculated here are extremely distorted.

Financing: Subsidised loans for house building

The previous calculation also completely ignored the possibilities of promotional loans. These can facilitate supplementary of up to 4000 €. And also to get loans is easier if the house meets certain standards.

KfW divides into three efficiency house categories, for example. KfW Efficiency House 55, 40 and 40 Plus. The efficiency attributed to a house is determined by the efficiency measures taken, which we will discuss in more detail below.

Renovation: Conversion to energy saving with solar energy & Co.

The trinity for saving energy is made up of heating, ventilation and insulation. Building measures with a positive influence on these three factors can massively improve the energy efficiency of a house. There are a few options that open up, which we will look at in more detail here.

Construction measures: Ventilation, heating and insulation

Ventilation systems have the goal of permanently supplying the home with fresh air, even when the windows are closed. Why is this important in energy-efficient houses when ventilation consumes additional electricity?

In order to reduce transmission heat loss, not only is better external insulation and thicker windows installed in modern houses, but the windows can often no longer even be opened from the inside. To prevent a build-up of air and moisture, ventilation systems are used to ensure regular air exchange.

In addition, heating systems are becoming more sophisticated and efficient. Often, a modern heating system can already make a lot of difference when it comes to saving raw materials and ancillary costs.

Solar energy: photvoltaic and solar thermal – prices and more

The extraction of solar energy has long since ceased to be anything out of the ordinary and is taking place more and more both privately and in industrial form. Not least, this is also due to the promotion by the state.

A solar system costs between 5400 € and 13,300 € net, depending on the size and condition of the house. Included in this price are costs for installation and accessories. Another decisive factor is the size of the battery, which determines how much energy can be stored for times when the system is not producing.

The other, somewhat cheaper option for saving electricity is a solar thermal system. The costs here amount to 5000 – 10,000 €, depending on whether the Thermie should only support the hot water, or also the heating.

Although solar collectors themselves have a higher efficiency than photovoltaics, the efficiency is lost massively in the tubes, so that in the end it is difficult to determine which method is the more worthwhile.

Additional knowledge: Buying a house and selling it quickly

In this article we have focused very much on building a house and less on buying property. However, if that’s where your interest lies, then we have a lot of further reading on the subject that I’m sure you’ll find helpful. We tell you everything from the state of the real estate market to tips for your personal home purchase and what you should look for before buying.

Buying luxury real estate: Buy a villa, penthouse or loft – Tips & Tricks

Are you interested in facts, figures and data on how the price of luxury real estate is changing? Here you can find out how much you pay for real estate in different major cities and where the most money is spent on real estate. Just take a look and let yourself be inspired:

• Buy property

Selling a house: House too small? Sell houses at top prices

Maybe your family has grown, or you finally have the wherewithal to afford a bigger house. A little start-up cash from selling your old property definitely won’t hurt! Find out how to get your house sold not only quickly, but also for a good price here:

• Sell house fast

What is a solid house? Construction, materials and features

A solid house is a construction method of a house, whereby the house is built stone-on-stone from solid building materials. Individual wishes of the builder thus make each house a unique one-of-a-kind.

The opposite of the solid house is the prefabricated house. In this construction method, the house is built according to the modular principle with a wooden structure. For the solid house, on the other hand, materials such as aerated concrete, sand-lime brick, goat stone (walls and floors) and wood (staircase and roof construction) are used. All materials are delivered to the construction site, where they are later assembled into a house by specialist companies.

On average, the lifespan of a solid house is approx. 100-120 years and is therefore more durable than a prefabricated house. The price per square metre of a new building is on average 1,300 euros for the construction costs excluding the land. There is no upper limit for the price limit.

You want to buy or build a house, but don’t know which one is right for you? Then take a look at our guide to house types from A – Z! Here you will find all house types, from bungalow to terraced house!

Room layout: free design of your own 4 walls

Due to the individual wishes and needs according to which a solid house can be planned, there are many different options for the room layout. The design, size and use of individual rooms is entirely up to the builder. Walk-in wardrobes, an open kitchen or soundproofed music rooms – any interior or exterior wishes can be discussed with the architect.

Advantages and disadvantages: Location, infrastructure, construction time & more

80% of today’s builders still opt for an architect’s house in solid construction, despite the alternative of the cheaper prefabricated house. Which reasons speak for and against, to decide for the building of a solid house, is explained in the next paragraphs.

Advantages: high durability & good sound and fire protection

The decision to build a solid house brings you some advantages, also compared to a prefabricated house: The reason and the biggest advantage why the multitude of builders decide for a solid house is the individual design of the house. Floor plan, size, materials, shape and equipment of the house can be determined at will.

The solid materials such as concrete or stone provide a good indoor climate and improve the air and moisture circulation inside the room. The high-quality building material ensures a high sound and fire protection advantage.

The lifespan of a solid house is 100 to 120 years, so three generations can live in the house. In contrast to a prefabricated house, the solid house is also more resistant to environmental influences such as flooding or heavy rain. The long life and the solidity of the house also make it possible to achieve a higher sales price.

Costs of work on a solid house can be saved by doing work on the house yourself instead of hiring craftsmen for these activities. Up to a certain point, work done by the owner can be counted as equity.

• Individual design (floor plan, size, materials & equipment)
• Good indoor climate due to solid materials
• Good fire and sound protection
• Long service life
• Resistant to environmental influences
• High selling price
• Own contributions can be counted as equity

Disadvantages: long construction time & construction delays

Besides all the advantages, a solid house also brings negative points. Before the construction takes place, the financing for the house should be clarified. Possible subsidy programs can be claimed from credit institutions. The double burden of financing the new building and the additional rent for the previous apartment can be more easily managed with the help of a subsidy program.

Delays in construction due to extended periods of bad weather are not uncommon, as a builder this can increase not only the waiting time but also the cost. The reason for the extended construction time is often the long drying times of the building components, which lead to extensions. In addition, some of the construction stages can only be completed due to the weather, as is the case with the roof truss, for example.

The construction of a solid house requires the cooperation of several trades. The construction requires the support of bricklayers, roofers, painters, tilers and many more. Communication between the various tradesmen can therefore also be difficult. If the communication fails, it can also lead to delays or even construction errors.

• High financial burden
• Long construction time
• Often delays in construction
• Working in the weather
• Many different trades

Energy rules for builders & homeowners: correct insulation, heating and energy certificates

For builders and homeowners, there are energy rules that are relevant when it comes to building, buying or renovating. Heating, insulation and new energy certificates are the biggest points to consider. Which regulations and specifications apply to future owners or residents of a solid house will now be explained to you.

Heating: Replacing oil and gas boilers

All oil or gas boilers older than 30 years must be taken out of service. In addition, the German Energy Agency stipulates that owners of single-family and two-family homes with low-temperature and condensing boilers who occupied at least one apartment themselves on February 1, 2002 are exempt from the rule.

Insulate: Roofs and upper storey ceilings

Homeowners must insulate all ceilings of heated rooms that adjoin an unheated attic. Ergo the roof or the top floor ceiling of the house. dena excludes all homeowners who were using at least one flat in their house on 1 February 2002.

Energy certificates: Energy classes from A+ to H

The new provisions of the energy regulations also affect the energy certificate. This innovation includes the differentiation into various energy efficiency classes from A+ to H. The information must also be labelled in property advertisements so that consumers, tenants and buyers have more clarity about energy consumption.

Want to learn more about energy-efficient building? Here you can find out everything about

• Zero energy house and passive house
• Low-energy house

Land: selection and characteristics of the right plot

Before land can be used as building land, it must be checked whether this land may be built on and in what form. The land must be designated as building land according to §30 or §34 of the Building Code (BauBG), so that construction can take place on it without restriction.

A decisive factor in the construction of the solid house is the right choice of the plot. A location with a good infrastructure and a good connection to the transport network is a relevant point for many builders when determining the location. However, the so-called “micro factors” are not irrelevant either, these include disturbance factors in the vicinity of the future house such as noise, electricity pylons, electrosmog and the orientation of the garden.

The development plan provides information on the procurement of the building land. The height of the groundwater level as well as regulations on the ground floor and floor height up to the roof pitch and number of storeys are recorded here. So that contaminated sites in the soil, such as oil or building rubble, can be determined, a soil survey should be carried out; a sum of €800-2,000 should be calculated for this.

Checklist: Choice of the plot

When looking for the perfect property, some important factors should be considered. The most relevant points can be found here in a checklist:

• Is it designated building land?
• Is a good infrastructure available?
• Are there any interfering factors in the environment?
• What is the nature of the building land?
• Is a soil expertise required?

Tip. Buying a plot of land: Building area, building application & Co.

Important aspects when building a solid house: developer, architect & Co.

Building a house is a big task for every builder. It does not matter whether it is a prefabricated house or a solid house, the construction often turns out to be a time-consuming challenge. Always be reckoned with unforeseen construction delays, which can drive the costs massively up.

When building a house, there are two different ways you can proceed. On the one hand, there is the possibility to hire an architect, who designs your house individually and personally tailored to your needs. On the other hand, a developer can be commissioned, which usually presents you with pre-planned solutions and modules, which can be put together as you wish.

Especially in certain regions cheap plots of land can be purchased, because certain regions are concerned about the influx of new citizens. Thus, money can also be saved with the property, even if this does not correspond to your first desired location.

Building or buying a solid home: Tips & options for financing

Due to the high and long-term value of the house, you are in a good negotiating position with the bank with a solid house. The market value of a house is the basis for a construction or real estate loan. This is calculated from the material value of the property, the demand, the environment and the infrastructure. Furthermore, the year of construction, the substance, age and equipment of the property also flow into the sales value. Land value, general market value per square meter and the comparative price with other massive houses also play a role.

If the house is in a sought-after location and is also in good condition, the bank may grant a high loan amount. The property is considered collateral for the bank and can be financed via a land charge. The market value assessment should be carried out before any financing by an expert, because it is considered the basis for a financing assistance. In the case of solid houses, an annuity loan is granted and secured with a land charge. If the fixed period of the loan of usually 3 to 18 months is exceeded, interest surcharges are added. After the loan follows, if necessary, a follow-up financing.

• Building a house: Prices, costs, taxes & Co. – learn more here!

What you should consider before buying/renting a solid house

Solid houses of different styles can be purchased both for rent and for sale. Before signing a rental or purchase contract, the condition of the property should be checked for any defects.

Each type of house brings with it its own special characteristics that speak for or against the prospective buyers. A solid house is mainly determined by its individuality and long life. With an older building the energy Effienizenz of the house should be examined in each case. Otherwise it can come here to high energy and additional costs.

Large outdoor and garden areas require intensive maintenance, so there should be enough time and money to maintain the property in the long term.

Review of the purchase contract / lease agreement

The real estate contract must contain all the important points about the personal details of the buyer and seller. In addition, the negotiated price, location and description are listed. Information on equipment, furnishings and existing defects are also part of the contract points. Finally, the processing of the payment and the time of the handover of the keys are also documented in the contract.

An important clause to check the contract for is the exclusion of liability for material defects. If this is not excluded, the seller can oblige the buyer to compensation for already known defects.

Build or Buy: Arguments and comparison – Building a house vs. buying a house

Building or buying – this is the question facing those interested in a solid house. Buying a house and building a house each have different advantages and disadvantages that should be considered before making any decision. Costs and factors such as time play an important role.

House construction: first-time residents in an energy-efficient house

Unlike a house purchase, the time until moving into the house in a construction is a time of several months or a year. However, this period can also be delayed by weather conditions and a construction stop in winter.

With the construction of a house also comes a free design of the interior and room layout. First-time residents benefit from modern technology. The costs of your own home can be permanently reduced by opting for an energy-efficient house.

The average value of a self-built detached house is 1,300 euros per square metre, but this can be increased or decreased by individual influencing factors.

Buying a house: Prices determined by location

Buyers of a solid house are spared the costly and time-consuming construction phase and can move into the house more quickly. New residents of a house can remove non-load-bearing walls of the house and thus enlarge rooms and change the room layout. Conversions are particularly easy with solid houses because individual bricks can be removed, so new windows can be installed or old windows can be enlarged.

With a purchased house, however, previously hidden diminished value damage can only come to light in retrospect. In terms of price, a solid house that has already been built has an advantage, as the house is offered at a fixed price and, as in the case of construction, the price is driven up. Properties in need of renovation and refurbishment are offered at a lower price than properties that are ready for immediate occupancy.

Building or buying? – Find out more about building costs, interest rates and financing here.

Tips for the renovation of a solid house: Value increase, subsidies & Co.

Not only can energy and ancillary costs be saved with a refurbishment, but the value of the house can also be increased. While the value of the house increases, the risk of damage decreases in return. A core refurbishment also has an impact on insurance costs, the premiums paid for homes that have not been refurbished are significantly more expensive. Prioritizing is important so that areas that require extra urgency, such as leaky window repairs, are rehabilitated first.

Information on subsidies and companies should be carefully researched in advance: Subsidies from the state can be granted here. Trade directories, relatives or the Internet can help you select the right companies.

Suitable for families, investors & individualists

For whom is this construction method of the solid house the right choice? Large families and people who attach great importance to the individual design of their own home will find a suitable type of house in a solid house. Due to the high value of the house, it is also well suited as an investment.

Large families: space and home for several generations

A solid house is ideal for large families. Size and number of rooms can be chosen according to your own needs. Due to the long life of the house, it can also be passed on to future generations of the family.

Individualists: individual design also for luxurious wishes

A solid house can be planned individually by an architect. Lovers of individual design can have the house built entirely according to their own personal wishes and needs. Luxurious wishes can also be implemented in the best way with a solid house.

Developers who want to use a property as an investment

In contrast to the prefabricated house, the solid house is in a significantly more expensive price segment and is a much higher investment. Using a solid house as an investment and a store of value is a good idea for old-age provision in view of the high market value.

Checklist for your solid house: heating, equipment & co.

Every builder has his own requirements and wishes for his own home, from the selection of the plot of land to the furnishing of the interior. The size and dimensions of the outdoor facilities must also be planned in advance. In addition to these points, factors such as the heating method, thermal insulation and the glazing of the windows must also be considered.

Listed here is a checklist of key points to consider when choosing your home:

• Heating method: How is the house heated? Cost comparisons etc.
• Thermal insulation: Have values & status explained
• Bathroom equipment: Check need for renovation
• Windows: number, glazing, condition
• Outdoor facilities: garden, pitches & co.
• Number of rooms: Are the rooms enough for you? Expansion possibilities?

NEO: Facts, figures and course

NEO is a Chinese cryptocurrency whose protocol can be used to develop and execute smart contracts and distributed apps (dApps). It resembles Ethereum’s blockchain ecology in many areas and is therefore often criticized.

NEO also known as the Ethereum of China

Even though the two blockchains are similar in many areas, the transaction speed of both blockchains differs immensely. While Ethereum allows 15 transactions per second, NEO allows 1,000 transactions per second. Unlike Ethereum, NEO also does not use Solidity, the programming language created by Ethereum itself, but rather the well-known Java and C# programming languages. This allows for easier and faster programming of smart contracts and dApps.

Currently NEON is mainly represented on the Chinese market.

Tip. BitCoin, cryptocurrency & blockchain? What does it mean? Learn more about BitCoin, Cryptocurrency & Block Chainhere

Now, before we get to the actual value and share price performance, here are all the facts and figures about NEO:

• Cryptocurrency: NEO
• Inventor: Da Hongfei
• Publication: 2014
• Consensus Algorithm: Proof of Stake

Intraday (current daily price during the course)

The current NEO price during the day.

Month: 30 days review of NEO

Here you can see the NEO price of the last 30 days.

Year in progress: 12 months

Here you can see the NEO price of the last 12 months.

Total runtime

Here you can see the NEO rate for the entire term.

Crypto alternatives: Ripple, Dash and Cardano

There are now over 4,500 cryptocurrencies. While that sounds like a large amount, only just under 100 of them reach a daily trading turnover of $1,000 or more. Other popular crypto alternatives to NEO include Ripple, Dash, and Cardano! You can find out more about each cryptocurrency here.

Ripple (RXP): Open-source protocol for international payment transactions

With the XRP Coin, Ripple is also considered a digital currency, but compared to other cryptocurrencies, it is not based on the blockchain. Ripple sees itself more as an open-source protocol for a payment network. The goal: to make international payments cheaper, faster and more efficient.

• Ripple

Dash: continuation of the Bitcoin

Hardly any coin has managed to grow as fast as Dash! The cryptocurrency is considered the sequel to the legendary Bitcoin. Unlike Bitcoin, Dash has the advantage that the hash algorithms are more energy and time efficient. As with its predecessor, transactions here remain secure, fast and efficient.

• Dash

Cardano (ADA): digital vouchers for services and goods

Smart contracts, dApps and fast, secure transactions – the blockchain platform Cardano combines all of these. It is also the basis of the cryptocurrency ADA. Unlike other digital currencies that go to market as coins, ADA is a voucher that can be exchanged for services and goods.

• Cardano

Cryptocurrencies: List

BitCoin, BitCoin Cash, Ethereum, Litecoin, Dash, Ripple, Zcash or Binarcy Coin: they are considered the answer to traditional means of payment. The digitization and decentralization of money makes banks superfluous. Only buyers and sellers are responsible for the control and security of their digital money. You too want to invest in Bitcoin & Co? We have an overview of the most popular cryptocurrencies here.

• Cryptocurrencies: List

Cardano (ADA): Facts, Figures & Quotes

Smart contracts, dApps and fast, secure transactions – the blockchain platform Cardano combines all of these. It is also the basis of the cryptocurrency ADA, which has been appearing in the form of vouchers since 2017. Unlike other digital currencies that go to market as coins, this is a voucher that can be exchanged for services and goods.
Although Cardano is still a relatively young blockchain, its developers have set a high goal. Cardano is supposed to become the third generation cryptocurrency and thus dethrone Bitcoin and Ethereum.

Tip. BitCoin, cryptocurrency & blockchain? What does it mean? Learn more about BitCoin, Cryptocurrency & Block Chainhere

Now before we get into the current value and price action, here are all the facts and figures about Cardano (ADA):

• Cryptocurrency: Cardano (ADA)
• Inventor: Charles Hoskinson
• Publication: 2017
• Consensus Algorithm: Proof of Stake
• Average block size: 5.34 GB

Intraday (current daily price during the course)

The current Cardano exchange rate during the day.

Month: 30 days review of Cardano (ADA)

Here you can see the Cardano rate for the last 30 days.

Year in progress: 12 months

Here you can see the Cardano share price for the last 12 months.

Total runtime

Here you can see the Cardano rate for the entire term.

Crypto Alternatives: Bitcoin, Ethereum and Dash

There are now over 4,500 cryptocurrencies. While that sounds like a large amount, only just under 100 of them reach a daily trading turnover of $1,000 or more. Other popular crypto alternatives to Cardano are Bitcoin, Ethereum and Dash! You can read more about the individual cryptocurrencies here.

Bitcoin (BTC): pioneer of cryptocurrencies

Bitcoin, or BTC for short, is now not only the best-known cryptocurrency in the world, but is also considered the first cryptocurrency ever. The first digital currency was invented by Satoshi Nakamoto. Who is behind it is still a mystery today. One thing is clear, however: Bitcoin has revolutionized the financial world forever.

• Bitcoin

Ethereum (ETH): Second generation cryptocurrency

Just like other cryptocurrencies, Ethereum is based on state-of-the-art blockchain technology. Ethereum itself is not a pure cryptocurrency, but can be used for blockchain projects of all kinds. As a decentralized ecosystem, Ethereum is therefore also often used as an open protocol for decentralized applications, such as smart contracts. Ethereum’s own cryptocurrency is called Ether – ETH for short.

• Ethereum

Dash: Continuation of the Bitcoin

Hardly any coin has managed to grow as fast as Dash! The cryptocurrency is considered the sequel to the legendary Bitcoin. Unlike Bitcoin, Dash has the advantage that the hash algorithms are more energy and time efficient. As with its predecessor, transactions here remain secure, fast and efficient.

• Dash

Cryptocurrencies: List

BitCoin, BitCoin Cash, Ethereum, Litecoin, Dash, Ripple, Zcash or Binarcy Coin: they are considered the answer to traditional means of payment. The digitization and decentralization of money makes banks superfluous. Only buyers and sellers are responsible for the control and security of their digital money. You too want to invest in Bitcoin & Co? We have an overview of the most popular cryptocurrencies here.

• Cryptocurrencies: List

Dash: Facts, Figures & Price

The cryptocurrency Dash – also known as XCoin or Darkcoin at the time – is considered the sequel to the legendary Bitcoin. This digital currency is also based on the latest blockchain technology to ensure fast, secure and anonymous transactions. In contrast to Bitcoin, Dash has the advantage that the hash algorithms are more energy- and time-efficient – thus hardly any other coin has been able to develop as rapidly as Dash!

Now before we get into the actual value and price history, here are all the facts and figures about Dash:

• Cryptocurrency: Dash
• Inventor: Evan Duffield
• Publication: 2014
• Consensus Algorithm: Proof of Work
• Average block size: 35,849 KB

Intraday (current daily price during the course)

The current Dash price during the day.

Month: 30 days review of Dash

Here you can see the Dash rate for the last 30 days.

Year in progress: 12 months

Here you can see the Dash rate for the last 12 months.

Total runtime

Here you can see the Dash rate for the entire term.

Crypto Alternatives: Bitcoin, Ethereum and Litecoin

There are now over 4,500 cryptocurrencies. While that sounds like a large amount, only just under 100 of them reach a daily trading turnover of $1,000 or more. Other popular crypto alternatives to Dash include Bitcoin, Ethereum, and Litecoin! You can find out more about each cryptocurrency here.

Bitcoin (BTC): pioneer of cryptocurrencies

Bitcoin, or BTC for short, is now not only the best-known cryptocurrency in the world, but is also considered the first cryptocurrency ever. The first digital currency was invented by Satoshi Nakamoto. Who is behind it is still a mystery today. One thing is clear, however: Bitcoin has revolutionized the financial world forever.

• Bitcoin

Ethereum (ETH): Second generation cryptocurrency

Just like other cryptocurrencies, Ethereum is based on state-of-the-art blockchain technology. Ethereum itself is not a pure cryptocurrency, but can be used for blockchain projects of all kinds. As a decentralized ecosystem, Ethereum is therefore also often used as an open protocol for decentralized applications, such as smart contracts. Ethereum’s own cryptocurrency is called Ether – ETH for short.

• Ethereum

Litecoin (LTC): Fast hashing thanks to Skrypt

As a digital currency, you can use Litecoin to pay for services and goods. The cryptocurrency is also very popular as an investment and in currency trading. The special feature of Litecoin: The hash algorithm Scrypt allows an increased transaction speed – while the integrity of the blockchain is still guaranteed!

• Litecoin

Cryptocurrencies: List

BitCoin, BitCoin Cash, Ethereum, Litecoin, Dash, Ripple, Zcash or Binarcy Coin: they are considered the answer to traditional means of payment. The digitization and decentralization of money makes banks superfluous. Only buyers and sellers are responsible for the control and security of their digital money. You too want to invest in Bitcoin & Co? We have an overview of the most popular cryptocurrencies here.

• Cryptocurrencies: List